TPS3837L30DBVR

TPS3837L30DBVR Overview

This power management consists of 5 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. Manage ics operate at 1.8V supply voltages. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. In total, IC powers are 5 pins on the board. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 1.6V. The supply voltage (Vsup) should not exceed 6V volts in this IC power. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 250nA volt supply current. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by TPS3837L30. The power management can work with a maximum supply temperature of 15μA.

TPS3837L30DBVR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.6V
250nA operating supply current

TPS3837L30DBVR Applications

There are a lot of Texas Instruments TPS3837L30DBVR Voltage Supervisors applications.

• Smart meter
• Telecommunications equipment
• Detection of phase imbalance
• Low voltage/high power - AI, GPU
• Battery cars
• Battery-powered equipment
• Kitchen appliances
• Electric heating appliances
• Military communications
• Military electronics