TPS3839A09DQNT

TPS3839A09DQNT Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. Cut Tape (CT)-packaging is used. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for 4-XDFN Exposed Pad functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. According to the specification, the package's peak reflow temperature is specified to be 260. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. There are 4 pins on the power managment ic. Supply voltage (Vsup) should be at least 900mV for this power management. Voltage (Vsup) shouldn't exceed 6.5V volts in this PMIC. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 150nA. To find similar IC managements from the manufacturer, you can always search by TPS3839A09. The maximum supply temperature is 500nA.

TPS3839A09DQNT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
150nA operating supply current

TPS3839A09DQNT Applications

There are a lot of Texas Instruments TPS3839A09DQNT Voltage Supervisors applications.

• Functional modules
• Digitally controlled LDO regulators circuit
• Automotive permanent magnet synchronous motors
• Embedded computing
• Electronics installed in the vehicle
• Smartphones
• FPGA design
• Military communications
• Medical-specific insulation monitor
• Power distribution systems of operating room