TPS386000RGPT

TPS386000RGPT Description

The TPS3860x0 family of supply voltage supervisors (SVSs) can monitor four power rails that are greater than 0.4 V and one power rail less than 0.4 V (including negative voltage) with a 0.25% (typical) threshold accuracy. Each of the four supervisory circuits (SVS-n) assert a RESETn or RESETn output signal when the SENSEm input voltage drops below the programmed threshold. With external resistors, the threshold of each SVS-n can be programmed (where n = 1, 2, 3, 4 and m = 1, 2, 3, 4L, 4H). Each SVS-n has a programmable delay before releasing RESETn or RESETn. The delay time can be set independently for each SVS from 1.4 ms to 10 s through the CTn pin connection. Only SVS-1 has an active-low manual reset (MR) input; a logic-low input to MR asserts RESET1 or RESET1. SVS-4 monitors the threshold window using two comparators. The extra comparator can be configured as a fifth SVS to monitor negative voltage with voltage reference output VREF. The TPS3860x0 has a very low quiescent current of 11 μA (typical) and is available in a small, 4-mm x 4- mm, VQFN-20 package.

TPS386000RGPT  Features

? Four Independent Voltage Supervisors

? Channel 1:

– Adjustable Threshold Down to 0.4 V

– Manual Reset (MR) Input

? Channels 2, 3:

– Adjustable Threshold Down to 0.4 V

? Channel 4:

– Adjustable Threshold at Any Positive or

Negative Voltage

– Window Comparator

? Adjustable Delay Time: 1.4 ms to 10 s

? Threshold Accuracy: 0.25% Typical

? Very Low Quiescent Current: 11 μA Typical

? Watchdog Timer With Dedicated Output

? Well-Controlled Output During Power Up

? TPS386000: Open-Drain RESETn and WDO

? TPS386040: Push-Pull RESETn and WDO

? Package: 4-mm × 4-mm, 20-Pin VQFN

TPS386000RGPT   Applications

? All DSP and Microcontroller Applications

? All FPGA and ASIC Applications

? Telecom and Wireless Infrastructure

? Industrial Equipment

? Analog Sequencing