TPS40100RGETG4

TPS40100RGETG4 Overview

It comes in a 24-VFQFN Exposed Pad package, so switching controller can be used for most applications. The dc motor controller is adquate to generate for 1 outputs. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control has a supply voltage and operating voltage of 4.5V~18V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. A switching controller such as this can switch at a value of 100kHz~600kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Current Limit, Frequency Control, Power Good, Soft Start, Tracking which allows efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the QUAD position. Different dc switching's functions can be applied to 24 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. TPS40100 can be searched for other relevant dc to dc converter ics. In total, switching converter has 24 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 5.5V. You should note that the dc dc regulator's usual output current is 20A. DC regulator600kHz has the maximum frequency. A circuit should contain 18V in order to ensure the voltage regulator dc to dc runs safely and reliably. In a dormant state, the dc switching uses 1.8mA. Because the dc switcher's maximum input voltage is 18V users must limit the voltage accordingly. A supply voltage of 12V is required. There must be a 4.5V supply voltage. A dc switcher can only produce an output current of 20A. Datasheets state the switching converter can output up to 5.5V volts. Lowest voltage output of the voltage controller must be greater than 700mV.

TPS40100RGETG4 Features

Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION

TPS40100RGETG4 Applications

There are a lot of Texas Instruments TPS40100RGETG4 DC to DC converter applications.

• Remotely powered electric motors
• Product testing
• Communication system
• Low output voltage switching power supply circuits
• Radio equipment
• ATMs
• Smoke exhaust equipment
• Hydro power
• Die casting equipment
• Electrical power transmission