TPS40200DG4

TPS40200DG4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. An enclosure of Tube is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 4.5V~52V volts and has 4.5V~52V supply voltage. Worked in a -40°C~85°C TA dc switcher before. The switching controller is capable of switching at the 35kHz~500kHz position. dc dc regulators can be carried out with Surface Mount. Frequency Control, Soft Start provides dcdc regulator efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS40200". Switching converter has a total of 8 pins. DC regulator outputs 46.8V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 2.5A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 95 % to ensure reliability during power-up and power-down. Switching controller operates at a frequency of 300kHz. In a dormant state, the dc switching uses 1.5mA. A nominal working status is achieved when the input voltage is set to 12V. The maximum input voltage of the dc switcher is 52V, so users need to limit the voltage accordingly. There must be a 4.5V supply voltage. In this case, the dc switcher won't produce more than 3A watts of output current. Its datasheet indicates the switching converter can output a maximum of 46V volts. At its lowest voltage, the voltage controller does not produce less than 700mV.

TPS40200DG4 Features

Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 300kHz

TPS40200DG4 Applications

There are a lot of Texas Instruments TPS40200DG4 DC to DC converter applications.

• Household control circuits
• Arc suppression circuits
• Computer-related products
• Industrial robots
• Elevator lighting
• Access control systems
• Nuclear power plants
• Serial communication converter
• Flaw detection equipment
• CMM