TPS40210SHKK

TPS40210SHKK Overview

Capsuled in the 10-CDFF package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. Tube is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 5.5V~52V volts and has 5.5V~52V supply voltage. Suitable for work in a -55°C~210°C TA dc switcher. Using this switching controller, it is possible to switch at 35kHz~1MHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. DUAL are the position of the terminal of the switching converters. A variety of dc switching's functions can be performed on 10 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. In addition to "TPS40210", there are other relevant dc to dc converter ics you can find. There are a total of 10 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. 5.5V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 9V voltage. Considering the dc to dc regulator can only accept 52V input voltage, it is important to take note of this. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 67.3 % on power-up or power-down to ensure reliability. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 1MHz for this dc regulators. The supply current of the voltage controller is 10μA.

TPS40210SHKK Features

Transistor Driver Outputs
Switching Frequency: 35kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 67.3 %

TPS40210SHKK Applications

There are a lot of Texas Instruments TPS40210SHKK DC to DC converter applications.

• Machining centers
• Serial communication converter
• Milling machines
• Cutting machine tools
• CMM
• Arc suppression circuits
• Hydraulic presses
• Computer monitoring equipment of building
• Bending machines
• Plate bending machines