TPS40211DGQ

TPS40211DGQ Overview

This switching controller fits most application requirements since it is packaged in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~52V. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 35kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control, Soft Start. An analog IC SWITCHING REGULATOR is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of terminations with 10 of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. In addition to "TPS40211", there are other relevant dc to dc converter ics you can find. There are 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. The test statistics indicate that DC regulator outputs a voltage of 250V. The dc dc regulator's usual output current is 6A, which should be noted down when you start a project. voltage regulator dc to dcs with a 95 % duty cycle are designed to be reliable when powered on and powered off. A frequency of 1MHz is set for the switching controller. In a dormant state, the dc switching uses 1.5mA. The maximum input voltage of this dc switcher is 52V, so users must limit the voltage accordingly. A voltage of 4.5V is required for the supply. A dc switcher can only produce an output current of 6A. A datasheet states that the switching converter can output 9V volts at its maximum. Having a current greater than 2.5mA may result in improper operation and possibly damage to the component.

TPS40211DGQ Features

Transistor Driver Outputs
Switching Frequency: 35kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 1MHz

TPS40211DGQ Applications

There are a lot of Texas Instruments TPS40211DGQ DC to DC converter applications.

• Arc suppression circuits
• Computed tomography (CT)
• Smoke exhaust equipment
• Communication system
• Hydrogen power
• Product testing
• Telecommunications equipment
• Driver circuits
• Photovoltaic power
• Surge protection circuits