TPS43000PWR

TPS43000PWR Overview

The switching controller fits in the 16-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 1.8V~9V volts and has 1.8V~9V supply voltage. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 250kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. To provide efficient switching control, Current Limit, Enable, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . Various 16 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 3.5V volts. TPS43000 can be used to locate other relevant dc to dc converter ics. 16 pins are present on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Test statistics indicate DC regulator outputs 8V voltage. The dc dc regulator's usual output current is 6A, which should be noted down when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. The max frequency of the pmic can reach 2MHz. Hence, AUTOMATIC PFM MODE is used to better suit the DC to DC voltage regulator's situation. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 9V. As long as the dc switching is in a dormant state, it utilizes 1mA. The maximum input voltage of this dc switcher is 9V, so users must limit the voltage accordingly. Voltage 1.8V must be supplied. In this case, the dc switcher won't produce more than 6A watts of output current. Its datasheet indicates the switching converter can output a maximum of 8V volts. At least 800mV voltage is output by the voltage controller.

TPS43000PWR Features

Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Current Limit, Enable, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
AUTOMATIC PFM MODE

TPS43000PWR Applications

There are a lot of Texas Instruments TPS43000PWR DC to DC converter applications.

• Textile machinery
• Electrical distribution systems
• Surge protection circuits
• Sink circuits
• Program control systems
• Industrial controllers
• Drilling machines
• Remotely powered electric motors
• Communication system
• Motor controller circuits