TPS43336QDAPRQ1

TPS43336QDAPRQ1 Overview

It comes in the 38-PowerTSSOP (0.240, 6.10mm Width) package, which makes switching controller suitable for most applications. 3 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The program can handle Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 4V~40V. Suitable for a -40°C~125°C TJ dc switcher. With this switching controller, you can switch at 150kHz~600kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. Thare switching converters has a terminal (s) at DUAL . The 38 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 13V is input. You can find other relevant dc to dc converter ics by searching "TPS43336". Total pins of switching converter are 38. Switching converter is a special type of Switching Regulator or Controllers. dc dc voltage regulators should have a minimum input voltage of 4V. Statistically, DC regulator outputs 5V volts. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. There is a maximum frequency of 600kHz for this dc regulators. This value is ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 40V to ensure safety and reliability. A dc to dc voltage regulator in the Automotive, AEC-Q100 series, it belongs to this family. DC switching uses 30μA when it is dormant.

TPS43336QDAPRQ1 Features

Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
ALSO HAS A CONTROL TECHNIQUE OF PFM; OPERATES IN ADJUSTABLE MODE FROM 0.9 TO 11V

TPS43336QDAPRQ1 Applications

There are a lot of Texas Instruments TPS43336QDAPRQ1 DC to DC converter applications.

• Game consoles
• ATMs
• Industrial robots
• Elevator lighting
• Wind power
• Printing equipment
• Photovoltaic power
• Pipe bending machines
• Digital display device
• Various precision measuring detectors