TPS53114PW

TPS53114PW Overview

This switching controller fits most application requirements since it is packaged in a 16-TSSOP (0.173, 4.40mm Width) package. The dc motor controller is adquate to generate for 1 outputs. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Qualified to work in an dc switcher with -40°C~85°C TA. A switching controller such as this can switch at a value of 350kHz 700kHz . The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Current Limit, Enable, Frequency Control, Soft Start for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. DUAL are the position of the terminal of the switching converters. The 16 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "TPS53114", there are other relevant dc to dc converter ics you can find. Pins number 16 of switching converter in total. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 24V. If you are starting a new project, you should note the dc dc regulator's typical output current is 170mA. DC regulator's maximum frequency is 700kHz. To better satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. The dc to dc voltage regulator belongs to the D-CAP2? series. When the dc switching is dormant, it uses 350μA. Since the dc switcher's maximum input voltage is 24V, the voltage must be regulated accordingly. The supply voltage must be 4.5V. Current supplied to the controller should not exceed 0.6mA. Datasheets indicate that the switching converter can output 5.5V volts at its maximum. A current of 350μA is supplied to it. Its lowest voltage output is not less than 760mV.

TPS53114PW Features

Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V

TPS53114PW Applications

There are a lot of Texas Instruments TPS53114PW DC to DC converter applications.

• CMM
• Photovoltaic power
• Experimental setup
• Adjustable voltage or current linear circuits
• USB circuits
• Wide-range voltage regulation circuits
• Drilling machines
• Computer-related products
• Pipe bending machines
• Surface processing equipment