TPS53219RGTR

TPS53219RGTR Overview

This switching controller fits most application requirements since it is packaged in a 16-VFQFN Exposed Pad package. 1 outputs can be generated with the dc motor controller. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. The system can process Transistor Driver dc switching's outputs (s). Voltages 4.5V~25V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. It can switch at 500kHz. Surface Mount makes it suitable for general dc dc regulator. Enable, Frequency Control, Power Good, Soft Start provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. QUAD are the position of the terminal of the switching converters. There are many different types of terminations for 16. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "TPS53219". In total, switching converter has 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. A 5.5V voltage of DC regulator was detected in the test statistics. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. DC regulator has a maximum frequency of 1.07MHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V so that the need can be met more directly. It is suggested that users apply 25V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. It belongs to the D-CAP?, Eco-Mode? series of dc to dc voltage regulator. In a dormant state, the dc switching uses 400μA. The maximum input voltage of dc switcher is 28V, so users should limit their voltage accordingly. This voltage controller requires a supply voltage of 12V. The supply voltage must be 4.5V. DC switcher will not be able to provide an output current above 20A volts. There should be 0.59mA current exceeding 0.59mA supplied to the controller. Datasheets state the switching converter can output up to 5.5V volts. 600mV voltage output is lower than 600mV.

TPS53219RGTR Features

Transistor Driver Outputs
Switching Frequency: 500kHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.5V

TPS53219RGTR Applications

There are a lot of Texas Instruments TPS53219RGTR DC to DC converter applications.

• Communication system
• Injection molding machinery
• Printing equipment
• Overvoltage protection circuits in TV sets
• Planers
• Computer rooms
• Correction machines
• Flexible manufacturing cells
• Bending machines
• Driver circuits