TPS61240IDRVRQ1

TPS61240IDRVRQ1 Overview

For optimal performance, this voltage regulator uses the Tape & Reel (TR) package. This harley voltage regulator has 6 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 6-WDFN Exposed Pad package. There are 1 outputs configured on this voltage regulator 12v. The adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. -40°C~85°C TA should be the operating temperature when voltage regulator is operating. There is a switching frequency of 3.5MHz for this voltage regulator 12v. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 5V. A maximum design flexibility is provided by the 500mA Switch output current of voltage regulator. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, voltage regulator provides a nominal input voltage of 3.6V. The regulator voltage is included in the Power Management Circuits subcategory of voltage regulators. As part of the TPS61240 series of regulators, the voltage regulators can be found. Voltage regulator is capable of giving voltage at 5V volts. The switching regulator operation is carried out by 6 pins. The output voltage for this switching regulator should be kept at 3V at least. A maximum output current of 500mA A is provided to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 18.5V. The switching DC-DC regulator belongs to the Automotive, AEC-Q100 family of electronic voltage regulator 12vs. Switching regulators such as this operate from voltages of 5.5V. Without external influences, harley voltage regulator consumes 30μAA of quiescent current. Switching regulators with the ALSO HAVE PFM CONTROL MODE feature are more efficient and stable than those without. It is designed to operate from a 3.6V V supply, so that DC DC switching regulator can be used as a switching regulator.

TPS61240IDRVRQ1 Features

1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 5.5V
ALSO HAVE PFM CONTROL MODE

TPS61240IDRVRQ1 Applications

There are a lot of Texas Instruments TPS61240IDRVRQ1 Voltage Regulators applications.

• Servo drive system
• Sensitive electronic devices
• Serial communication converter
• Direct power supply system
• Linear guide
• Balance equipment
• Photovoltaic power
• Access control systems
• Motor controller circuits
• Domestic water pumps