TPS61300YFFT

TPS61300YFFT Overview

To save board space, it uses the 20-UFBGA, DSBGA package. For the design of these LED drivers, 3 outputs are used.Surface Mount is used for mounting the led light driver.This emerges as a DC DC Regulator with high efficiency and reliability.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Camera Flash benefits significantly from the program.A frequency of 1.92MHz is used as the basis for operation.In this case, the terminations are set to 20.The LED light driver is configured with a base of 0 pins.The segment count is 2.Part number TPS61300 represents this LED driver.It is acceptable to operate with a supply voltage of 5.5V.A voltage of 5.7V is produced by it.It is equipped with 20 pin count.In addition, its characteristics are classified into Display Drivers.When the input voltage is set to 2.5V, it operates.To meet high efficiency standards, it works with a voltage of 2.5V.Whenever the maximum supply current is allowed, the value reaches 5.5V.Its high efficiency is based on the fact that the maximal supply current should not exceed 700μA.Loads can only be powered by 1.5A current.The maximum output current of 1.25A allows it to deliver all benefits of a LED driver.The consumption of current is 590μAin the absence of external factors.

TPS61300YFFT Features

Available in the 20-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.92MHz
Supply voltage of 3.6V

TPS61300YFFT Applications

There are a lot of Texas Instruments TPS61300YFFT LED Driver ICs applications.

• Stage and Studio lighting
• Refrigeration lighting
• Constant Voltage Power Source for portable equipment
• Architectural lighting
• OLED power supply for portable equipment
• Gallery lighting
• LED headlights
• Medical surgery lighting
• Down lights
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights