TPS64202DBVRG4

TPS64202DBVRG4 Overview

With its SOT-23 package, the switching controller fits the needs of most applications. There is a Tape & Reel (TR) solid enclosure around the pmic. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. The switching converters's terminal (s) are designed at DUAL . 6 terminations with a variety of function. The DC switcher's nominal voltage is 3.8V. There are 6 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. To operate the voltage regulator dc to dc safely and reliably, users should apply 6.5V. The temperature should be at least -40°C. DC regulator should run at a temperature 85°C higher than 85°C. In total, thare switch converters have 1 functions. As long as the dc switching is in a dormant state, it utilizes 20μA. We design voltage regulators switchings with 6 pins. In order to limit the voltage of a dc switcher whose maximum input voltage is 6.5V, it must be limited by the user. Input values of 3A make it ideal for switching controllers. Normally, it outputs a value of 6.5V. Voltage 1.8V must be supplied. A dc switcher can only produce an output current of 3A. At its maximum, the switching converter can output 6.5V volts. Neither the voltage controller's lowest voltage output 1.2Vr its highest voltage output is less than 1.2V. With this controller, the phase is 1.

TPS64202DBVRG4 Features

Max Duty Cycle: 100 %

TPS64202DBVRG4 Applications

There are a lot of Texas Instruments TPS64202DBVRG4 DC to DC converter applications.

• Drilling machines
• Program control systems
• Emergency lighting monitoring equipment
• Telecommunications equipment
• Automatic testing equipment
• Elevator lighting
• Radio equipment
• Serial communication converter
• Imported equipment
• Die casting equipment