TPS92001DR

TPS92001DR Overview

Using its 8-SOIC (0.154, 3.90mm Width) package, it is possible to save board space. In LED drivers, the outputs are all set to 1.The led driver mounting is done by using Surface Mount.Initially, it emerges as a AC DC Offline Switcher with high efficiency and a high degree of reliability.The led light driver operates normally at -40°C~105°C TJ. The benefits are considerable for Lighting.As a result, it operates based on the frequency of 100kHz.A termination of 8 is used to operate the LED driver.In this LED driver, the base is configured as 8.It is under the base part number TPS92001 that you can find this LED driver.A maximum supply voltage of 21V is acceptable.The device has a voltage output of 5V volts.There are 8 pins on it.When the maximum supply current is less than 900μA, the device is able to provide a high level of efficiency.800mA is the maximum current the load can handle.This electronic component may perform its functions fully if the switching frequency is maintained at 110kHz.When no external factors are present, there is 600μA current consumption.There is 5V output voltage on this device.The circuit is assigned 12V volts when operating.

TPS92001DR Features

Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~105°C TJ
Frequency of 100kHz
Switching frequency of 110kHz
Output voltage of 5V

TPS92001DR Applications

There are a lot of Texas Instruments TPS92001DR LED Driver ICs applications.

• Stage and Studio lighting
• Power source for accessories such as car audios, car navigation systems, and ETC systems
• A- lamps
• Other Electronic Devices
• LED headlights
• Constant Voltage Power Source for portable equipment
• Architectural lighting
• LED Lighting PFCs, Linear Dimmable
• Linear fluorescent
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights