TS3704IN

TS3704IN Overview

For convenience, it is packaged in 14-DIP (0.300, 7.62mm) .This comparator is of the CMOS, Push-Pull output type.Ready for shipping in Tube package.As you can see, the comparator has14 terminals.The electrical component in this case belongs to the Comparator families.Supplied by 3V voltage, the comparator can accomplish the many demanding tasks.In terms of type, this is a typical General Purpose comparator.Electronic comparator has a total of 4 elements.The device contains 14 pins.Electronic comparator is recommended to mount using type Through Hole .Ideally, the operating temperature should be set at -40°C~125°C in order to prevent malfunction.14 pins are available on the comparator.If you require more pin-to-pin solutions, search TS3704 for more options.There is 25μA current flowing in this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 25μA .If the current supply exceeds 25μA , the comparator could malfunction.In order to operate the device, 5V power supplies are sufficient.Input current to the device cannot exceed 1pA .

TS3704IN Features

CMOS, Push-Pull output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 25μA

TS3704IN Applications

There are a lot of STMicroelectronics TS3704IN linear comparators applications.

• Power management
• High-Speed Sampling Circuits
• Simple Analog-to-Digital Converters (ADCs)
• Battery management and protection
• Security Detection Systems
• Point of load regulators
• General-Purpose, Low-Voltage Applications
• Zero-Crossing Detectors
• Mobile Communications
• Notebooks and PDAs