TS393IN

TS393IN Overview

The product is packaged in 8-DIP (0.300, 7.62mm) in order to facilitate transportation.A comparator with a CMOS, Open-Drain output is used here.The part is shipped by Tube .The comparator has 8 terminals.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.Electronic comparator is possible to classify the chip as General Purpose .This element consists of 2 elements in total.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended to mount the device using type Through Hole .As a precaution, it is recommended to set the operating temperature to -40°C~125°C to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching TS393 .There is a quiescent current of 25μA in this comparator.The PCB or other board can be mounted using the Through Hole on it.Electronic comparator is recommended that the nominal supply current of the device be 20μA .If the current supply exceeds 20μA , the comparator might be damaged.There is sufficient power to run the device from 5V power supplies.

TS393IN Features

CMOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 25μA

TS393IN Applications

There are a lot of STMicroelectronics TS393IN linear comparators applications.

• Consumer Medical Electronics
• RC Timers
• Automotive
• Multivibrators and High-Voltage Digital Logic Gates
• Set Top Boxes
• Mobile Communications
• Simple Analog-to-Digital Converters (ADCs)
• Metering Systems
• Notebooks and PDAs
• Limit Comparators