English

All Products

View All >>
  • TS522IDT

TS522IDT

2 Channels 37mA per Channel 250nA 80 dB Instrumentational OP Amps 15V 5V~30V ±2.5V~15V TS522 8 Pins 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Origchip NO: 761-TS522IDT
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 979
  • Description: 2 Channels 37mA per Channel 250nA 80 dB Instrumentational OP Amps 15V 5V~30V ±2.5V~15V TS522 8 Pins 8-SOIC (0.154, 3.90mm Width)(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Factory Lead Time 10 Weeks
Lifecycle Status ACTIVE (Last Updated: 6 months ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~125°C
Packaging Cut Tape (CT)
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Operational Amplifier
Packing Method TR
Technology BIPOLAR
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 15V
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number TS522
Pin Count 8
Operating Supply Voltage 15V
Number of Channels 2
Operating Supply Current 4mA
Nominal Supply Current 5mA
Output Current 37mA
Slew Rate 7V/μs
Architecture VOLTAGE-FEEDBACK
Amplifier Type General Purpose
Common Mode Rejection Ratio 80 dB
Current - Input Bias 250nA
Voltage - Supply, Single/Dual (±) 5V~30V ±2.5V~15V
Output Current per Channel 37mA
Input Offset Voltage (Vos) 850μV
Bandwidth 15MHz
Neg Supply Voltage-Nom (Vsup) -15V
Unity Gain BW-Nom 9000 kHz
Voltage Gain 100dB
Low-Offset NO
Frequency Compensation YES
Bias Current-Max (IIB) @25C 0.75μA
Height Seated (Max) 1.75mm
Length 4.9mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TS522IDT Overview


Packaged in a 8-SOIC (0.154, 3.90mm Width) case, the buffer op amp is ready to use. There are two types of operational amplifiers in this circuit. It comes in a Cut Tape (CT) case, which protects instrumentation amplifier from damage during delivery. The number of terminations approaches 8. A total of 8 pins are located on this board. It would be helpful if you could remember that this op amp ic should be powered by an 15V battery. This particular linear amplifier is a type of Operational Amplifier device, to be precise. 8 pins are included on the operational amplifiers. With regards to the offset voltage of the input, buffer amplifier is rated at 850μV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~125°C as far as operating temperature is concerned. As long as the supply current of the chip does not exceed 4mA, this op amp ic can operate. The voltage gain should stay at 100dB. As far as the device is concerned, buffer amplifier has 2 channels. The operating supply voltage of the buffer op amp is rated at 15V. TR is adopted to pack the instrumentation amplifier.

TS522IDT Features


8 Pins
supply voltage of 15V
100dB voltage gain

TS522IDT Applications


There are a lot of STMicroelectronics TS522IDT Instrumentational OP Amps applications.

  • High input resistance broadband
  • Signal filtering
  • Power generator
  • Test equipment
  • Micro signal measurement
  • Automatic control
  • Medical instruments
  • Biopotential
  • High-frequency data acquisition systems
  • single/dual op amp sum and difference circuits