TSM934CSE+T

TSM934CSE+T Overview

For convenience, it is packaged in 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .As a result, it is designed with Tape & Reel (TR) package.The electrical component in this case belongs to the Comparator family.Electronic comparator can be classified as a with Voltage Reference chip.In total, it contains 4 elements.A Surface Mount mounting type is recommended.As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.There are 16 pins on the comparator.You may wish to search TSM934 for more solutions that address your specific needs.A quiescent current of 6.5μA is observed in this comparator.The PCB or other board has a Surface Mount for mounting.Electronic comparator is recommended that the nominal supply current be 6.5μA in order to use the device normally.In this case, the part is from the TSM93x comparator series.

TSM934CSE+T Features

CMOS, Push-Pull, TTL output capability
with Voltage Reference IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 6.5μA

TSM934CSE+T Applications

There are a lot of Silicon Labs TSM934CSE+T linear comparators applications.

• Zero-Crossing Detectors
• Multivibrators and High-Voltage Digital Logic Gates
• General Purpose Low Voltage Applications
• Battery management and protection
• Power Supervision
• Power management
• Laptop Computers
• RC Timers
• Metering Systems
• Industrial