All Products

UC27131N

25V Bipolar 2.54mm PMIC UC27131 8 Pin 25V 8-DIP (0.300, 7.62mm)


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-UC27131N
  • Package: 8-DIP (0.300, 7.62mm)
  • Datasheet: PDF
  • Stock: 238
  • Description: 25V Bipolar 2.54mm PMIC UC27131 8 Pin 25V 8-DIP (0.300, 7.62mm) (Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Height Seated (Max) 5.33mm
Width 7.62mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Contains Lead
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm)
Surface Mount NO
Number of Pins 8
Weight 528.605208mg
Operating Temperature -40°C~85°C TA
Packaging Tube
JESD-609 Code e4
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory Peripheral Drivers
Terminal Position DUAL
Number of Functions 1
Supply Voltage 25V
Terminal Pitch 2.54mm
Base Part Number UC27131
Pin Count 8
Number of Outputs 1
Output Type Bipolar
Max Output Current 700mA
Operating Supply Voltage 65V
Power Supplies 25V
Interface On/Off
Nominal Supply Current 2.5mA
Output Configuration Low Side
Output Current 300mA
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 2.5mA
Propagation Delay 6 μs
Input Type Non-Inverting
Turn On Delay Time 6 μs
Switch Type General Purpose
Min Input Voltage 8V
Max Input Voltage 65V
Output Current per Channel 300mA
Nominal Input Voltage 65V
Ratio - Input:Output 1:1
Voltage - Load 8V~65V
Driver Number of Bits 1
Output Peak Current Limit-Nom 0.9A
Built-in Protections TRANSIENT; OVER CURRENT

UC27131N Overview


It is packaged in the form of a Tube.This file is included in package 8-DIP (0.300, 7.62mm).Mounting type Through Hole is selected for the LED driving board.There is a General Purpose switch type associated with it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There is a default setting of 1 for output.The LED driving board operates at Not Required volts.Voltage output is Bipolar volts at maximum.The UC27131 family contains this object.A total of 8 terminations have been recorded.It is necessary to use the 8 pins in order to operate the LED driver.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 700mA in order to meet the operation requirements.Using a voltage of 25V allows for high efficiency.8 pins are connected to it in total.The output current is set to 300mA in this case.Self-contained LED driver with Peripheral Drivers capacity in an econtainer.There is a voltage supply of 25V volts on this part.It is recommended that the supply voltage be set at 65V in order to achieve maximum efficiency.A maximum input voltage of 65V volts can be applied to it.There is a minimum input voltage of 8V volts for this LED driver.It requires a maximum current requirement of 2.5mA.

UC27131N Features


Supplied from 25V

UC27131N Applications


There are a lot of Texas Instruments UC27131N Power Switches ICs applications.

  • Wearable Devices
  • Notebook PC
  • Solid State Drivers
  • Wireless Headsets
  • Hard Disk Drives
  • Portable Video Game Players
  • HDD, SSD
  • Notebook and Tablet Computers
  • Wireless Modem Data Cards
  • Portable GPS Device