UC2715DP

UC2715DP Overview

Its 16-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.There is a package in the form of Tube.There is a mounting bracket in the way of Surface Mount.When the supply voltage is set to 7V~20V, it can demonstrate its superiority.The gate type on this device is N-Channel, P-Channel MOSFET.Temperature range -40°C~150°C TJ is allowed for this device.The input type for this program is Non-Inverting.There are 16 terminations to form the base of its configuration.You will find various related parts under the base part number UC2715.In this case, Surface Mount indicates how the device is to be mounted.At the time of design, it is configured with 16 pins.In order to operate, a voltage of 15V has to be applied.Mosfet driver employs an interface chip called BUFFER OR INVERTER BASED MOSFET DRIVER as Mosfet drivers interface chip.An output current as high as 2A can be achieved at maximum power.There are various useful electronic components in its subcategory Peripheral Drivers.The board has 16 component pins.The basis has 2 integrated outputs.The output current supported by the device is 2A.For higher stability, the supply current should be kept at 24mA.Mosfet gate drivers is recommended that the operating supply voltage be set to 15V volts.Improved efficiency can be obtained based on the frequency of 1MHz.

UC2715DP Features

Embedded in the Tube package
Employing a gate type of N-Channel, P-Channel MOSFET
16 pins

UC2715DP Applications

There are a lot of Texas Instruments UC2715DP gate drivers applications.

• Uninterruptible Power Supplies (UPS)
• Solar power supplies
• High frequency line drivers
• 3-Phase Motor Inverter Driver
• Automotive Applications
• High power buffers
• Active Clamp Flyback or Forward and Synchronous Rectifier
• General Purpose 3-Phase Inverter
• Pulse transformer drivers
• A/D drivers