UC2823DWTRG4

UC2823DWTRG4 Overview

It comes in the 16-SOIC (0.295, 7.50mm Width) package, which makes switching controller suitable for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). A 8.4V~30V voltage is supplied to the dc control and used for operating it. Worked in a -25°C~85°C TA dc switcher before. In this switching controller, the switch can be set to 340kHz~460kHz. dc dc regulator is made easier with Surface Mount. The dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start for efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the DUAL position. A variety of terminations with 16 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 15V. A search for "UC2823" will reveal other relevant dc to dc converter ics. 16 pins are on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC regulator outputs 13V voltage according to the test statistics. The dc to dc regulator can only accept 30V input voltage. If you start a project, note down the dc dc regulator's usual output current of 200mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 100 %. The switching controller works at a frequency of 1MHz. To better satisfy the need, DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE. Voltage 15V is required for supply. In order to ensure proper operation, the controller should not receive more current than 33mA.

UC2823DWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2823DWTRG4 Applications

There are a lot of Texas Instruments UC2823DWTRG4 DC to DC converter applications.

• Hydro power
• Terrestrial set-top boxes
• Overvoltage protection circuits in TV sets
• Computer rooms
• USB circuits
• Injection molding machinery
• Medical equipment
• Surface processing equipment
• Analog precision reference circuits
• Access control systems