UC2825QTR

UC2825QTR Overview

This switching controller fits most application requirements since it is packaged in a 20-LCC (J-Lead) package. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). Voltages 8.4V~30V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. With this switching controller, you can switch at 340kHz~460kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at QUAD. Various 20 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. In addition to "UC2825", there are other relevant dc to dc converter ics you can find. There are 20 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. The minimum input voltage of the dc dc voltage regulator should be 8.8V. A 13V voltage of DC regulator was detected in the test statistics. The dc to dc regulator can only accept a maximum input voltage of 30V. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 50 %. Switching controller operates at 1MHz Hz. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the need.

UC2825QTR Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC2825QTR Applications

There are a lot of Texas Instruments UC2825QTR DC to DC converter applications.

• Precision electronic equipment
• Low output voltage switching power supply circuits
• Wind power
• Die casting equipment
• CMM
• Computer monitoring equipment of building
• Scientific testing
• seismic instrument power circuits
• Textile machinery
• Computer application technology