UC2902DG4

UC2902DG4 Overview

It is acceptable to ship in the direction of Tube .packaged the power management in 8-SOIC (0.154, 3.90mm Width) for ease of transportation, it is easy to transport.For easy adaptation, Surface Mount is a universal mounting method.The power management is intended for use at Load Share Controller as well as other applications.Ideally, the operating temperature of the power management ic should be set at -40°C~100°C in order to prevent malfunction.As a result, this power management is powered by 2.7V~20V voltage.Try search UC2902 to get more power ic's pin-to-pin solutions for your special needs.power ic's power ic's pin-to-pinYou can find 8 terminals of the power management.It has been praised for its accuracy as a POWER SUPPLY SUPPORT CIRCUIT analog IC.8 pins are present on the power managment ic.This connector has a Surface Mount for mounting it on a PCB or other type of board.It is capable of handling a variety of demanding tasks when powered by 5V voltage.This power ic has 8 pins starting from the pinout.Voltage 4mA is required to operate this power management ic.Power Management Circuits is the series that it belongs to.A minimum of 2.7V is needed for it to start.It is necessary for 1 channels to work together in order for the output quality to be maintained.You should not supply more voltage than 20V to the power supply ic.The power management chip can be run with 5V power supplies.

UC2902DG4 Features

Mainly used in Load Share Controller applications
Operating temperature: -40°C~100°C
POWER SUPPLY SUPPORT CIRCUIT analog IC

UC2902DG4 Applications

There are a lot of Texas Instruments UC2902DG4Power Management applications.

• Power Supplies
• Chromebook
• Automotive Advanced Driver Assistance System (ADAS)
• Netbooks
• LP2996-N: DDR1 Termination Voltage
• I/Os (FPGAs, ASICs, DSPs)
• Electronic Measurement Units
• Networking Equipment
• Automotive Infotainment
• Digital Cores