UC3825DWTRG4

UC3825DWTRG4 Overview

The switching controller fits in the 16-SOIC (0.295, 7.50mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 8.4V~30V. Workable in an dc switcher where 0°C~70°C TA is the 0°C~70°C TArm. The switching controller can be switched at 340kHz~460kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Current Limit, Enable, Frequency Control, Ramp, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 16. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. There is a DC switcher's nominal voltage of 15V. Other relevant dc to dc converter ics will be returned if you search "UC3825". There are only 16 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. The minimum input voltage of the dc dc voltage regulator should be 8.8V. As determined by the test statistics, the output voltage of DC regulator is 13V. It should be noted that the dc to dc regulator only accepts 30V voltage as input voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 200mA. The duty cycle of the voltage regulator dc to dc can be set to 50 % on power-up or power-down to ensure reliability. A frequency of 1MHz is set for the switching controller. DC to DC voltage regulator has a value of CAN ALSO BE CONFIGURED IN CURRENT MODE to better satisfy the need.

UC3825DWTRG4 Features

Transistor Driver Outputs
Switching Frequency: 340kHz~460kHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
CAN ALSO BE CONFIGURED IN CURRENT MODE

UC3825DWTRG4 Applications

There are a lot of Texas Instruments UC3825DWTRG4 DC to DC converter applications.

• Electric water heaters
• Various precision measuring instruments
• Mobile phones
• Medical monitoring systems
• Sink circuits
• Scientific testing
• Arc suppression circuits
• Electric heating, lighting
• Computer rooms
• Overvoltage protection circuits in TV sets