UC3902DG4

UC3902DG4 Overview

Tube is acceptable as a shipping the power management method.In order to facilitate transportation, it is packaged the power management in 8-SOIC (0.154, 3.90mm Width) .For easy adaptation, Surface Mount is a universal mounting method.There are a number of applications targeted at Load Share Controller .Ideally, the operating temperature of the power management ic should be set to -40°C~100°C to avoid any malfunctions.For its operation, this power management requires 2.7V~20V voltage.You can find more power ic's pin-to-pin solutions by searching UC3902 .The power management has 8 terminals.It has been praised for its accuracy as a POWER SUPPLY SUPPORT CIRCUIT analog IC.In this power managment ic, there are 8 pins.There is a Surface Mount for mounting on a PCB or other board.Supplied by 5V voltage, the power manager can accomplish the many demanding tasks.The pinout of the power ic starts from 8 pins it has.It operates on a voltage of 4mA volts.It belongs to the Power Management Circuits series.At least 4V will be required to start the ic supplies.It is important for 1 channels to work together in order to maintain a high quality output.If the voltage is greater than 10V , you are not supposed to power the power supply ic.The power management chip can be run with 5V power supplies.The ic power supply should be outputting 1.5mA at the moment.It is also possible to detect UNDER VOLTAGE LOCKOUT when using this integrated power supplies.

UC3902DG4 Features

Mainly used in Load Share Controller applications
Operating temperature: -40°C~100°C
POWER SUPPLY SUPPORT CIRCUIT analog IC
UNDER VOLTAGE LOCKOUT

UC3902DG4 Applications

There are a lot of Texas Instruments UC3902DG4Power Management applications.

• Telecommunications Equipment
• Equipment Run-Off of Battery Backup
• Power Factor Correction
• Switches
• I/Os (FPGAs, ASICs, DSPs)
• Telecommunication
• SSTL-3 Termination
• DSP
• HSTL Termination
• Set-Top-Box