UC5601NG4

UC5601NG4 Overview

A 18 termination occurs when a transmission line is terminated with a device that matches its characteristic impedance. A low package cost makes the 24-DIP (0.600, 15.24mm) popular in the electronics industry. Packaging follows Tube's material specifications. Through Hole allows mounting of PCBs. A maximum operating temperature of 0°C~70°C should not be exceeded. The material qualifies for standard applications as a SCSI-qualified material. In order to maintain normal operation, there is a 4V~5.25V Supply Voltage provided. A Base Part Number UC5601 can help you find related parts. There are specific uses for the 24 pins. A 18 signal line is one that is exclusively used for transmitting signals or intelligence, or for public or private communication. High efficiency can be achieved by maintaining the supply voltage at 4.75V. On the back is a Through Hole-mount. It belongs to the Subcategory Bus Terminators. Computers and other communications devices use 24 pins, which are pronged contacts. In order to operate, 4.75V Power Supplies are required. Here is the resistance of this electrical device: 110Ohm (Ω). 5.25V requires a current supply to function properly.

UC5601NG4 Features

18 terminations
Tube package
UC5601 family
24 pin count
18 signal lines
24 pins
4.75V power supplies

UC5601NG4 Applications

There are a lot of Texas Instruments UC5601NG4 Signal Terminators applications.

• Programmable logic controller
• Desktop PCs
• SCSI cable
• PCI Cards
• Optical disk drives
• Disk array (RAID)
• CSU and DSU
• workstations
• Remote input module
• Data Routers