UCC21530QDWKRQ1

Description

The UCC21530QDWKRQ1 is a 4-A source and 6-A sink peak current isolated dual-channel gate driver. It's made to drive IGBTs, Si MOSFETs, and SiC MOSFETs at up to 5-MHz with the best propagation delay and pulse-width distortion in the industry.

A 5.7-kVRMS reinforced isolation barrier isolates the input side from the two output drivers, providing common-mode transient immunity of at least 100 V/ns (CMTI). A working voltage of up to 1850 V can be achieved thanks to internal functional isolation between the two secondary-side drivers.

This driver can be set up as two low-side drivers, two high-side drivers, or a half-bridge driver with adjustable dead time (DT). When the EN pin is pulled low, it shuts down both outputs at the same time, however when it is left open or pulled high, it allows normal functioning. Primary-side logic faults require both outputs to be low as a fail-safe strategy.

VDD supply voltages of up to 25 V are accepted by the device. The driver is suited for interfacing with both analog and digital controllers due to its wide input VCCI range of 3 V to 18 V. Under-voltage lock-out (UVLO) protection is present on all supply voltage pins.

Features

? Programmable overlap and dead time

? Rejects input pulses and noise transients shorter than 5 ns

? Operating temperature range –40 to +125°C

? Safety-related certifications:

– 8000-VPK isolation per DIN V VDE V 0884-11 :2017-01

– 5.7-kVRMS isolation for 1 minute per UL 1577

– CSA certification per IEC 60950-1, IEC 62368-1, IEC 61010-1 and IEC 60601-1 end equipment standards

– CQC certification per GB4943.1-2011

? Common-mode transient immunity (CMTI) greater than 100-V/ns

? Isolation barrier life >40 years

? 4-A peak source, 6-A peak sink output

? TTL and CMOS compatible inputs

? 3-V to 18-V input VCCI range

? Up to 25-V VDD output drive supply

– 8-V and 12-V VDD UVLO options

? AEC-Q100 qualified with:

– Device temperature grade 1

– Device HBM ESD classification level H2

– Device CDM ESD classification level C6

? Functional Safety Quality-Managed

– Documentation available to aid functional safety system design

? Universal: dual low-side, dual high-side or half-bridge driver

? Wide body SOIC-14 (DWK) package

? 3.3-mm spacing between driver channels

? Switching parameters:

– 19-ns typical propagation delay

– 10-ns minimum pulse width

– 5-ns maximum delay matching

– 6-ns maximum pulse-width distortion

Applications

? AC inverter and servo drive

? AC-to-DC and DC-to-DC power delivery

? Energy storage systems

? HEV and BEV battery chargers

? Solar string and central inverters

? AC-to-DC and DC-to-DC charging piles