UCC25702D

UCC25702D Overview

In the 14-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. There is a Tube solid enclosure around the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). 8.8V~15V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 100kHz. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Current Limit, Frequency Control, Sequencing, Soft Start. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . Various 14 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 11V. Search for "UCC25702" to find other relevant dc to dc converter ics. There are a total of 14 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended to use 9.6V as the minimum input voltage of dc dc voltage regulator. Statistically, the DC regulator outputs 400mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 100mA. A duty cycle set at 100 % ensures voltage regulator dc to dc reliability during power-on and power-off. A frequency of 700kHz is used by the switching controller. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 14V. As long as the dc switching is in a dormant state, it utilizes 750μA. Switching controller is necessary to supply a voltage of 11V. It is not recommended to supply more current to the controller than 20mA. The supply current is 750μA.

UCC25702D Features

Transistor Driver Outputs
Switching Frequency: 100kHz
Current Limit, Frequency Control, Sequencing, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 700kHz

UCC25702D Applications

There are a lot of Texas Instruments UCC25702D DC to DC converter applications.

• Smart grid
• Analog precision reference circuits
• Overvoltage protection circuits in TV sets
• Plate bending machines
• Digital precision reference circuits
• Television equipment
• Mobile phones
• Surface processing equipment
• ATMs
• Access control systems