UCC27200DDAG4

UCC27200DDAG4 Overview

Gate drivers provides greater flexibilGate driversy to use the SOIC package.Rail/Tube is the form of the package.8 terminations constitute its foundation.In this case, Surface Mount indicates how the device is to be mounted.Mosfet driver is configured wMosfet driverh 8 pins when designing.A voltage of 12V is required for its operation.As its interface IC, HALF BRIDGE BASED PERIPHERAL DRIVER is being employed.An output current as high as 3A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.There are 2 outputs integrated for its basis.140°C is the maximum acceptable operating temperature.The allowable minimum value of operating temperature is -40°C.If you want a stable supply current, you should keep it at 4mA.In order for the device to operate, the supply voltage must be 17V.In order for the device to operate, a supply voltage of 8V must be applied.Mosfet gate drivers is outputting a current of 3A.As a rule of thumb, the operating supply voltage should be set to 12V.By using 1MHz frequency, efficiency can be increased.

UCC27200DDAG4 Features

Embedded in the Rail/Tube package
8 pins

UCC27200DDAG4 Applications

There are a lot of Texas Instruments UCC27200DDAG4 gate drivers applications.

• Industrial Power Supplies
• Uninterruptible Power Supplies (UPS)
• Driving GaN Power Transistors used in Full or Half?Bridge, LLC,
• Digitally controlled power supplies
• Automotive Applications
• Industrial Motor Inverter - Power Tools, Robotics
• Pulse transformer drivers
• serial peripheral interface (SPI), I2C
• Motor controllers
• LCD/LCoS/DLP portable and embedded pico projectors