UCC27200DR

UCC27200DR Overview

For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) is the packaging method.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 8V~17V supply voltage, it can demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.In this device, temperatures must not exceed -40°C~140°C TJ.Non-Inverting is used as the input type in this program.It's configured with 8 terminations.You will find various related parts under the base part number UCC27200.The mount method is Surface Mount.Mosfet driver is configured wMosfet driverh 8 pins when designing.With a supply voltage of 12V, it is designed to operate.An output current as high as 3A can be achieved at maximum power.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board contains 8 pins for component connections.High-side voltage - Max (Bootstrap) can be as low as 120V.Mosfet driver is based on a basis of 2 outputs that have been integrated.Mosfet gate drivers supports a current output of 3A.Using 1.3W as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.To maintain higher stability, the supply current should always be 4mA.As a rule of thumb, the operating supply voltage should be set to 12V.A frequency of 1MHz can improve efficiency.

UCC27200DR Features

Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 1.3W

UCC27200DR Applications

There are a lot of Texas Instruments UCC27200DR gate drivers applications.

• Motor Controls
• Isolated switch mode power supplies (SMPS)
• Isolated Supplies for Motor Control
• PCMCIA applications
• Portable computers
• Motor Control
• Solar power supplies
• Isolated Gate Driver Supplies
• Active filtering
• Portable Navigation Devices