UCC27201ADDA

UCC27201ADDA Overview

For greater flexibility, the 8-PowerSOIC (0.154, 3.90mm Width) package is adopted.A package of Bulk has been used.In this case, gate drivers is mounted along the way of Surface Mount.In the absence of a 8V~17V supply voltage, its superiority can be demonstrated.A gate type of N-Channel MOSFET has been used in its design.Temperature range -40°C~140°C TJ is allowed for this device.This program uses the input type of Non-Inverting.Its configuration starts with 8 terminations.There are numerous related parts listed under its base part number UCC27201.Devices are mounted by Surface Mount.As a result, it is configured with 8 pins when it is designed.A supply voltage of 12V is required for operation.Mosfet driver is possible for the output current to be as low as 3A.Its subcategory of MOSFET Drivers contains various useful electronic components.The board contains 8 pins for component connections.High-side voltage - Max (Bootstrap) can be as low as 120V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The output current supported by the device is 3A.Based on its maximum power dissipation of 2.7W, it is clear that it is capable of transferring and conducting power loss without overheating.To ensure high stability, the supply current should be kept at 5.5mA.In this case, the voltage is 250mV.Mosfet gate drivers is recommended that the operating voltage of the supply be set at 12V.

UCC27201ADDA Features

Embedded in the Bulk package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 120V
Maximum power dissipation of 2.7W

UCC27201ADDA Applications

There are a lot of Texas Instruments UCC27201ADDA gate drivers applications.

• A/D drivers
• Motor controllers
• Motor Controls
• Isolated Supplies for controller area network (CAN),
• serial peripheral interface (SPI), I2C
• High frequency line drivers
• Automotive Applications
• Welding
• RGB applications
• High-voltage isolated DC-DC converters