UCC2801N

UCC2801N Overview

It comes in a 8-DIP (0.300, 7.62mm) package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 7.4V~12V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. The switching controller can be switched at 46kHz. Through Hole makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Frequency Control. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. 8 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input is 10V. In addition to "UCC2801", there are other relevant dc to dc converter ics you can find. There are only 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 1V voltage according to the test statistics. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 50 %. In most applications and prototype designs, DC switcher is qualified as a Through Hole. Switching controller operates at a frequency of 1MHz. Input voltage can be set to 2.5V for nominal working status. Switching controller is necessary to provide a voltage of 10V. You should not supply more current than 25mA to the controller. The nominal current supply of this the controllers dc is 500μA.

UCC2801N Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC2801N Applications

There are a lot of Texas Instruments UCC2801N DC to DC converter applications.

• Computer monitoring equipment of building
• Bending machines
• Smoke prevention equipment
• Emergency lighting monitoring equipment
• Television equipment
• Various precision measuring detectors
• CMM
• Surface processing equipment
• Post equipment
• CNC system