UCC2803N

UCC2803N Overview

It comes in the 8-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tube solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. Voltages 3.6V~12V are the dc control's supply voltage and operating voltage, respectively. Suitable for work in a -40°C~85°C TA dc switcher. A switching controller such as this can switch at a value of 31kHz . The Through Hole makes it ideal for general dc dc regulator. The dcdc regulator features Frequency Control for efficient switching control. A SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 10V. In addition to "UCC2803", there are other relevant dc to dc converter ics you can find. The switching converter has a total of 8 pins. Switching converter type is specifically Switching Regulator or Controllers. The minimum input voltage of the dc dc voltage regulator should be 4V. Test statistics indicate DC regulator outputs 4.06V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. DC switcher's Through Hole qualifies it for most applications and prototypes. There is 1MHz frequency setting on the switching controller. There is a requirement for a 10V supply voltage. There should be 25mA more than 25mA amps of current supplied to the controller. The nominal current supply of this the controllers dc is 500μA.

UCC2803N Features

Transistor Driver Outputs
Switching Frequency: 31kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2803N Applications

There are a lot of Texas Instruments UCC2803N DC to DC converter applications.

• SMT equipment
• Network technology
• Alternators
• Wind power
• Elevator lighting
• Machining centers
• Ball screw pair
• Large fire protection systems
• Low output voltage switching power supply circuits
• Analog precision reference circuits