UCC2813N-5

UCC2813N-5 Overview

Capsuled in the 8-DIP (0.300, 7.62mm) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 1. The pmic is packaged in Tube solid enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 3.6V~12V. Qualified to work in an dc switcher with -40°C~85°C TA. The Through Hole allows it to be used for dc dc regulator in general. Frequency Control provides dcdc regulator efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. Different dc switching's functions can be applied to 8 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. 10V nominal DC switcher's voltage input. UCC2813 can be searched for other relevant dc to dc converter ics. 8 pins are on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. An input voltage of 4V is the minimum required for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 1V. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. voltage regulator dc to dcs with a 50 % duty cycle are designed to be reliable when powered on and powered off. DC switcher's Through Hole makes it qualified for most application and prototype designs. DC switcher'sA frequency of 1MHz is set for the switching controller. Switching controller is necessary to provide a voltage of 10V. You should not supply more current than 30mA to the controller. There is a nominal current supply of 500μA for this the controllers dc. The frequency at which this controller generally works well is 1MHz.

UCC2813N-5 Features

Transistor Driver Outputs
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 50 %
Frequency: 1MHz
Switching Frequency: 1MHz

UCC2813N-5 Applications

There are a lot of Texas Instruments UCC2813N-5 DC to DC converter applications.

• Experimental setup
• Gear/thread machining machines
• Digital video recorders
• Handheld GPS
• Die casting equipment
• Telecommunications equipment
• PSRR circuits
• Large fire protection systems
• Industrial robots
• Alternators