UCC28250PW

UCC28250PW Overview

With a 20-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs can be generated with the dc motor controller. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with PWM Signal dc switching's outputs (s). The supply and operating voltage of the dc control are 4.7V~17V. Worked in a -40°C~125°C TJ dc switcher before. There is a switch at 85kHz~1.15MHz that can be used with this controller. Surface Mount makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Frequency Control, Ramp, Soft Start. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. An array of 20 terminations of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. You can find other relevant dc to dc converter ics by searching "UCC28250". 20 pins are present on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. The test statistics indicate that DC regulator outputs a voltage of 3.38V. normally, the dc dc regulator's output current is 20mA, which you should keep in mind when starting a project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 100 %. A frequency of 1MHz is used by the switching controller. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. For nominal working status, the input voltage can be set as 17V. This voltage controller requires a supply voltage of 12V. It runs on a 2.7mA supply current. Components may become damaged if their current exceeds 3.4mA. There is 2.7mA nominal current supply for this the controllers dc.

UCC28250PW Features

PWM Signal Outputs
Switching Frequency: 85kHz~1.15MHz
Current Limit, Enable, Frequency Control, Ramp, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC28250PW Applications

There are a lot of Texas Instruments UCC28250PW DC to DC converter applications.

• Hydrogen power
• Packaging
• Industrial robots
• Plate bending machines
• Game consoles
• Sensitive electronic devices
• Nuclear power plants
• Adjustable voltage or current linear circuits
• Wind power
• Sink circuits