UCC2897APW

UCC2897APW Overview

With its 20-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 8.5V~16V. Suitable for work in a -40°C~125°C TJ dc switcher. It can switch at 250kHz. A generalization of dc dc regulator can be made using Surface Mount. Current Limit, Enable, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. switching converters terminal (s) are designed to be at DUAL. 20 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "UCC2897". There are a total of 20 pins on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. DC regulator outputs 11.1V voltage based on test statistics. If you are starting a new project, you should note the dc dc regulator's typical output current is 2A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 74 %. Switching controllers work at 1MHz Hz. To run the voltage regulator dc to dc safely and reliably, users should apply 12V to the voltage regulator dc to dc. Input voltage can be set to 110V for nominal working status. The dc switcher's maximum input voltage is 16V; users must limit it accordingly. This voltage controller requires a supply voltage of 12V. Input current cannot exceed 2A with this dc switcher. There should be 3mA current exceeding 3mA supplied to the controller. Its datasheet indicates the switching converter can output a maximum of 11.1V volts. Input of 2mA current flow would satisfy the operation requirements of the switching converter .

UCC2897APW Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %
Frequency: 1MHz

UCC2897APW Applications

There are a lot of Texas Instruments UCC2897APW DC to DC converter applications.

• Refrigerators of central air conditioners
• Television equipment
• PSRR circuits
• Die casting equipment
• Radio equipment
• Textile machinery
• Special machining machine tools
• Shearing machines
• Planers
• Various precision measuring instruments