UCC2897APWR

UCC2897APWR Overview

It comes in the 20-TSSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 8.5V~16V volts and has 8.5V~16V supply voltage. Suitable for a -40°C~125°C TJ dc switcher. The switching controller can be switched at 250kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Soft Start for efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 20 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. The nominal DC switcher's voltage input is 12V. Searching "UCC2897" will return other relevant dc to dc converter ics. There are a total of 20 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. It is recommended that the dc dc voltage regulator's minimum input voltage be 8.5V. As determined by the test statistics, the output voltage of DC regulator is 3.3V. If you start a project, note down the dc dc regulator's usual output current of 2A. A duty cycle set at 74 % ensures voltage regulator dc to dc reliability during power-on and power-off. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 12V. A supply voltage of 12V is required. It is important that the controller is supplied with 3mA more than 3mA volts of current. For this the controllers dc, the nominal current supply is 2mA.

UCC2897APWR Features

Transistor Driver Outputs
Switching Frequency: 250kHz
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 74 %

UCC2897APWR Applications

There are a lot of Texas Instruments UCC2897APWR DC to DC converter applications.

• Electric heating, lighting
• Access control systems
• Production lines
• Terrestrial set-top boxes
• Experimental setup
• Magnetohydrodynamic power
• SMT equipment
• Plate bending machines
• Mobile phones
• Computer rooms