UCC28C40P

UCC28C40P Overview

As a result of 8-DIP (0.300, 7.62mm) compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. 6.6V~18V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~105°C TJ dc switcher. The switching controller is capable of switching at the Up to 1MHz position. dc dc regulator can be generalized using Through Hole. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 8 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "UCC28C40". There are only 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 18V. In most cases, the output current of the dc dc regulator will be 200mA, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 100 % during power-up and power-down. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. Switching controller operates at 1MHz Hz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN CURRENT MODE in order to better satisfy the requirement. As long as the dc switching is in a dormant state, it utilizes 2.3mA. 18V is the nominal working voltage.

UCC28C40P Features

Transistor Driver Outputs
Switching Frequency: Up to 1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz
ALSO OPERATES IN CURRENT MODE

UCC28C40P Applications

There are a lot of Texas Instruments UCC28C40P DC to DC converter applications.

• Emergency lighting monitoring equipment
• seismic instrument power circuits
• Industrial robots
• Solar power plants
• Computer application technology
• Direct power supply system
• Terrestrial set-top boxes
• Milling machines
• Special machining machine tools
• Computer monitoring equipment of building