UCC3813N-0

UCC3813N-0 Overview

The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tube enclosure. The system can process Transistor Driver dc switching's outputs (s). Voltages 6.9V~12V are the dc control's supply voltage and operating voltage, respectively. Worked in a 0°C~70°C TA dc switcher before. A switching controller such as this can switch at a value of 46kHz . It is suitable for general dc dc regulator when it is set to Through Hole. To provide efficient switching control, Frequency Control is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. An array of 8 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 10V. You can find other relevant dc to dc converter ics by searching "UCC3813". There are a total of 8 pins on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 7.5V as the minimum input voltage of dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 5.075V. In most cases, the dc dc regulator's output current is 200mA. This information should be noted when you begin working with the component. voltage regulator dc to dcs with a 100 % duty cycle are designed to be reliable when powered on and powered off. As DC switcher has a Through Hole, it's suitable for most applications and prototype designs. 1MHz is the frequency of the switching controller. This voltage controller requires a supply voltage of 10V. It is important that the controller is supplied with 30mA more than 30mA volts of current. nominal current supply for this the controllers dc is 500μA.

UCC3813N-0 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC3813N-0 Applications

There are a lot of Texas Instruments UCC3813N-0 DC to DC converter applications.

• SMT equipment
• Smoke exhaust equipment
• Injection molding machinery
• Machining centers
• Flaw detection equipment
• Computer rooms
• CMM
• Digital video recorders
• Domestic water pumps
• Thermal power