UCC3813N-1

UCC3813N-1 Overview

The switching controller fits in the 8-DIP (0.300, 7.62mm) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Tube solid enclosure protects the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. DC control operates at 7.4V~12V volts and has 7.4V~12V supply voltage. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller can be switched at 46kHz. dc dc regulator is made easier with Through Hole. Featured in the dcdc regulator is Frequency Control which allows efficient switching control. UCC3813 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 8 pins. DC regulator outputs 1V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 50 % to ensure reliability during power-up and power-down. Because of DC switcher's Through Hole, it is suitable for most prototype designs and applications. A frequency of 1MHz is used by the switching controller. The nominal supply current for this the controllers dc is 500μA.

UCC3813N-1 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
Max Duty Cycle: 50 %
Frequency: 1MHz

UCC3813N-1 Applications

There are a lot of Texas Instruments UCC3813N-1 DC to DC converter applications.

• Telecommunications equipment
• Electric water heaters
• Refrigerators of central air conditioners
• Planers
• Smoke prevention equipment
• Wide-range voltage regulation circuits
• Scientific testing
• Wind power
• Mobile phones
• Access control systems