UCC5611DWP

UCC5611DWP Overview

A 18 termination consists of terminating transmission lines with a device matching the line's characteristic impedance. Because of its low package cost, the 28-SOIC (0.295, 7.50mm Width) is widely used in the electronic industry. Tube's materials are followed in the packaging. Using Surface Mount, you mount it on a PCB. It is not recommended to exceed 0°C~70°C for the Operating Temperature. For standard applications, it is SCSI-qualified. In order to maintain normal operation, there is a 2.75V~5.25V Supply Voltage provided. You can use Base Part Number UCC5611 to locate related parts. For specific uses, 28 pins are included. In terms of 18 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. If you want the supply voltage to be as high as possible, you should maintain it at 3.3V. This device has a Surface Mount-mount. Subcategory Bus Terminators is where it belongs. The 3/5V Power Supplies are necessary for the operation of the system.

UCC5611DWP Features

18 terminations
Tube package
UCC5611 family
28 pin count
18 signal lines
3/5V power supplies

UCC5611DWP Applications

There are a lot of Texas Instruments UCC5611DWP Signal Terminators applications.

• personal computers
• Data Networking
• Storage area networks (SAN)
• ESD protection and termination of USB downstream ports downstream ports
• Set-top boxes
• CD-ROM drives
• Data Routers
• Data Switches
• USB hubs
• Telecommunication Equipment