UCC5614PWPG4

UCC5614PWPG4 Overview

The 9 termination method ends a transmission line with a device that matches the line's characteristic impedance. A low package cost makes the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad popular in the electronics industry. Based on Tube's materials, the packaging was designed. It is possible to mount PCBs on Surface Mount. There should be no more than 0°C~70°C operating temperature. This is a standard-qualified material. A 2.7V~5.25V Supply Voltage is provided to ensure normal operation. Base Part Number UCC5614 is useful for finding related parts. A specific purpose is served by the 24 pins. In general, a signal line is defined as a line devoted solely to transmitting signals or intelligence, whether it's for purposes of public or private communication. For high efficiency, it is recommended that the supply voltage is maintained at 3.3V. On the back is a Surface Mount-mount. This falls under Subcategory Bus Terminators. Contacts on computers and other communications devices are pronged, called 24 pins. Powered by 3/5V Power Supplies, the system can operate. Here, the resistance is 110Ohm (Ω). In order for it to operate, it requires the maximum amount of current.

UCC5614PWPG4 Features

9 terminations
Tube package
UCC5614 family
24 pin count
9 signal lines
24 pins
3/5V power supplies

UCC5614PWPG4 Applications

There are a lot of Texas Instruments UCC5614PWPG4 Signal Terminators applications.

• Network attached storage (NAS)
• Server and workstation
• Data Switches
• Data Networking
• Data Routers
• SCSI cable
• Disk array (RAID)
• Storage area networks (SAN)
• CD-ROM drives
• Telecommunication Equipment