UCC5617DWP

UCC5617DWP Overview

An example of a 18 termination would be one in which the characteristic impedance of the transmission line is matched to the device terminating the transmission line. In the electronic industry, the 28-SOIC (0.295, 7.50mm Width) has a reputation for being economical. Materials are taken from Tube's packaging. It is mounted on a PCB using Surface Mount. A temperature greater than 0°C~70°C should not be used as the operating temperature. Standard applications can be carried out with this SCSI-qualified material. You can use Base Part Number UCC5617 to locate related parts. It is intended to use the 28 pins for a specific purpose. Signal lines such as 18 are used for signals or intelligence transmission and are devoted exclusively to public or private service. High efficiency can be achieved by maintaining the supply voltage at 4.75V. In addition to the Surface Mount-mount, there is an S-mount. As part of Subcategory Bus Terminators, it is included. Computers and other communications devices use 28 pins, which are pronged contacts. Powered by 5V Power Supplies, the system can operate. Here is the resistance of this electrical device: 110Ohm (Ω). This device is a great choice for a wide variety of applications due to its ability to operate at voltages of 420mA. There is a minimum supply voltage of 4V needed for the system to run. Whenever 5.25V is maximal, the voltage is maximum. It is possible to have up to 1 eligible receivers/drivers on the field simultaneously with this electronic part.

UCC5617DWP Features

18 terminations
Tube package
UCC5617 family
28 pin count
18 signal lines
28 pins
5V power supplies

UCC5617DWP Applications

There are a lot of Texas Instruments UCC5617DWP Signal Terminators applications.

• Remote input module
• personal computers
• Telecommunication Equipment
• SCSI cable
• Data Routers
• plotters
• Compact disk drives
• workstations
• Optical disk drives
• IEC61131-2 type 1, 2 and 3