UCC5618DWP

UCC5618DWP Overview

It is possible to terminate a transmission line with a device matching the impedance of the line, which is known as 18 termination. Its low package cost makes the 28-SOIC (0.295, 7.50mm Width) very popular in the electronics industry. Packaging follows Tube's material specifications. With Surface Mount, it can be mounted on a PCB. It should not exceed 0°C~70°C°C when operating. Standard applications can be carried out with this SCSI-qualified material. With Base Part Number UCC5618, you can find related parts. Specific uses are provided with 28 pins. There are 18?signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. For high efficiency, it is recommended that the supply voltage is maintained at 4.75V. On it is a Surface Mount-mount. This item belongs to Subcategory Bus Terminators. Contacts on computers and other communications devices are pronged, called 28 pins. It is necessary to have 4.75V Power Supplies in order for the system to operate. This device has a resistance of 110Ohm (Ω). With its ability to operate on supply voltages of 420mA, this device is ideal for a wide range of applications. An input voltage of 4V is required to run the system. The voltage is at its maximum when 5.25V is maximal. When the part is in the field, it can have up to 1 eligible receivers/drivers.

UCC5618DWP Features

18 terminations
Tube package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies

UCC5618DWP Applications

There are a lot of Texas Instruments UCC5618DWP Signal Terminators applications.

• plotters
• laser printers
• Data Switches
• Programmable logic controller
• Data Routers
• workstations
• Data Networking
• Set-top boxes
• personal computers
• Optical disk drives