UCC5618PWPG4

UCC5618PWPG4 Overview

The 18 termination method ends a transmission line with a device that matches the line's characteristic impedance. A well-known feature of the 28-PowerTSSOP (0.173, 4.40mm Width) is its low packaging cost. Materials used for packaging are the same as those used by Tube. With Surface Mount, it can be mounted on a PCB. A maximum operating temperature of 0°C~70°C should not be exceeded. This material is SCSI-qualified for use in standard applications. Using Base Part Number UCC5618 will allow you to find related parts. There are specific uses for the 28 pins. There are 18?signal lines, which mean those lines for public or private signal or communication service and devoted exclusively to the transmission of signals or intelligence. Maintaining a constant supply voltage is key to high efficiency. A Surface Mount-mount is on it. In the Subcategory Bus Terminators, it belongs. Computers and other communications devices use 28 pins, which are pronged contacts. A 4.75V Power Supply is required to operate the system. This device has a resistance of 110Ohm (Ω). It is necessary to supply 5.25V with current so that it can function properly.

UCC5618PWPG4 Features

18 terminations
Tube package
UCC5618 family
28 pin count
18 signal lines
28 pins
4.75V power supplies

UCC5618PWPG4 Applications

There are a lot of Texas Instruments UCC5618PWPG4 Signal Terminators applications.

• IEC61131-2 type 1, 2 and 3
• Server and workstation
• Notebooks
• Compact disk drives
• Data Routers
• Disk array (RAID)
• workstations
• ESD protection and termination of USB downstream ports downstream ports
• laser printers
• CD-ROM drives