UCC5630AMWPTRG4

UCC5630AMWPTRG4 Overview

A 9 termination occurs when a transmission line is terminated with a device that matches its characteristic impedance. As a result of its low package cost, the 36-BSOP (0.295, 7.50mm Width) is well known in the electronic industry. Materials used for packaging are the same as those used by Tape & Reel (TR). Surface Mount is used for mounting it on a PCB. There should be no more than 0°C~70°C operating temperature. The material meets SCSI, LVD, SE-qualification for standard applications. Ensure normal operation by providing a 2.7V~5.25V Supply Voltage. For finding related parts, you can use Base Part Number UCC5630. A 36 pin serves a specific purpose. As an example, 9 signal lines are lines dedicated solely to the transmission of signals or intelligence, which are either public or private. If you want the supply voltage to be as high as possible, you should maintain it at 3.3V. In addition to the Surface Mount-mount, there is an S-mount. It belongs to the Subcategory Bus Terminators. 36 pins, which are pronged contacts, are used in computers and other communications devices. It is necessary to have 3/5V Power Supplies in order for the system to operate. This electrical device has a resistance of 105Ohm (Ω).

UCC5630AMWPTRG4 Features

9 terminations
Tape & Reel (TR) package
UCC5630 family
36 pin count
9 signal lines
36 pins
3/5V power supplies

UCC5630AMWPTRG4 Applications

There are a lot of Texas Instruments UCC5630AMWPTRG4 Signal Terminators applications.

• mainframes
• Data Networking
• USB hubs
• Compact disk drives
• Notebooks
• Data Switches
• Storage area networks (SAN)
• IEC61131-2 type 1, 2 and 3
• personal computers
• ESD protection and termination of USB downstream ports downstream ports