UCC5638FQP

UCC5638FQP Overview

The 15 termination method ends a transmission line with a device that matches the line's characteristic impedance. Its low package cost makes the 48-LQFP very popular in the electronics industry. Material choices are based on Tray's. Surface Mount is used for mounting it on a PCB. It should not exceed 0°C~70°C°C when operating. Standard applications can be carried out with this SCSI, LVD, SE-qualified material. Normal operation is ensured by a 2.7V~5.25V Supply Voltage. It is possible to find related parts using Base Part Number UCC5638. There are a number of 48 pins included for specific applications. In terms of 15 signal lines, these are lines devoted exclusively to the transmission of signals or intelligence, either public or private. The Supply Voltage should be maintained at 3.3V for high efficiency. On it is a Surface Mount-mount. A subcategory of Subcategory Bus Terminators contains it. Unlike other types of contacts, 48 pins are pronged. Power Supplies are not required to operate the device. Here is the resistance of this electrical device: 110Ohm (Ω). This device is a great choice for a wide variety of applications due to its ability to operate at voltages of 25mA.

UCC5638FQP Features

15 terminations
Tray package
UCC5638 family
48 pin count
15 signal lines
48 pins
3.3V power supplies

UCC5638FQP Applications

There are a lot of Texas Instruments UCC5638FQP Signal Terminators applications.

• Data Switches
• SCSI cable
• IEC61131-2 type 1, 2 and 3
• Notebooks
• CD-ROM drives
• Compact disk drives
• CSU and DSU
• Programmable logic controller
• Data Routers
• USB hubs