UCC5640PW28

UCC5640PW28 Overview

A 9 termination occurs when a transmission line is terminated with a device that matches its characteristic impedance. A well-known feature of the 28-TSSOP (0.173, 4.40mm Width) is its low packaging cost. Tube's packaging follows her materials. This is done using Surface Mount for mounting on a PCB. A temperature greater than 0°C~70°C should not be used as the operating temperature. It is a SCSI, LVD-qualified material for standard applications. Normal operation is ensured by a 2.7V~5.25V Supply Voltage. Base Part Number UCC5640 is useful for finding related parts. For specific applications, 28 pins are included. As an example, 9 signal lines are lines dedicated solely to the transmission of signals or intelligence, which are either public or private. It is important to maintain the supply voltage at 3.3V in order to achieve high efficiency. On the back is a Surface Mount-mount. A subcategory Bus Terminators is appropriate for it. The pronged contacts used in computers and other communication devices are called 28 pins. Power Supplies are needed to operate 3/5V Power Supplies. Here, the resistance is 105Ohm (Ω). This device is ideal for a wide range of applications since it can operate with 25mA supply voltages.

UCC5640PW28 Features

9 terminations
Tube package
UCC5640 family
28 pin count
9 signal lines
28 pins
3/5V power supplies

UCC5640PW28 Applications

There are a lot of Texas Instruments UCC5640PW28 Signal Terminators applications.

• High speed protected termination for digital input with serialized SPI output
• CD-ROM drives
• Disk array (RAID)
• mainframes
• PCI Cards
• Programmable logic controller and remote input modules
• Data Routers
• Set-top boxes
• workstations
• Data Networking