UCC5642MWP

UCC5642MWP Overview

Termination with a 9 device, which matches the transmission line's characteristic impedance, is considered a 9 termination. A well-known feature of the 36-BSOP (0.295, 7.50mm Width) is its low packaging cost. The Packaging follows Tube's materials. The mounting on the PCB is done with Surface Mount. A temperature greater than 0°C~70°C should not be used as the operating temperature. This material is SCSI, LVD-qualified for use in standard applications. In order to ensure normal operation, 2.7V~5.25V Supply Voltage is provided. It is possible to find related parts using Base Part Number UCC5642. It is intended to use the 36 pins for a specific purpose. Signal lines, or 9 lines, are those dedicated to the transmission of signals or intelligence while being public or private. Maintaining a constant supply voltage is key to high efficiency. The Surface Mount-mount is attached to it. There is a place for it in Subcategory Bus Terminators. Computers and other communications devices use 36 pins, which are pronged contacts. In order to operate, 3/55V Power Supplies are required. Its resistance is 105Ohm (Ω). To fully perform 5.25V's functions, it must receive its supply current.

UCC5642MWP Features

9 terminations
Tube package
UCC5642 family
36 pin count
9 signal lines
36 pins
3/55V power supplies

UCC5642MWP Applications

There are a lot of Texas Instruments UCC5642MWP Signal Terminators applications.

• Network attached storage (NAS)
• High speed protected termination for digital input with serialized SPI output
• CD-ROM drives
• Notebooks
• tape drives
• Desktop PCs
• ESD protection and termination of USB downstream ports downstream ports
• Programmable logic controller
• Server and workstation
• plotters